HP A5500 EI Command Reference Manual page 175

Field
RALM logfailure trap
AutoLearn aging time
Disableport Timeout
OUI value
Port mode
NeedToKnow mode
Intrusion mode
Max MAC address number
Stored MAC address number
Authorization
Description
Whether trapping for MAC authentication failure is enabled or not. If it
is enabled, the port sends trap information when a user fails MAC
address authentication.
Sticky MAC aging timer. The timer applies to all automatically learned or
manually configured sticky MAC addresses.
Silence timeout period of the port that receives illegal packets, in
seconds.
List of OUI values allowed
Port security mode, which can be one of the following modes:

autoLearn

macAddressWithRadius

macAddressElseUserLoginSecure

macAddressElseUserLoginSecureExt

secure

userLogin

userLoginSecure

userLoginSecureExt

macAddressOrUserLoginSecure

macAddressOrUserLoginSecureExt

userLoginWithOUI
Need to know (NTK) mode, which can be one of the following modes:

NeedToKnowOnly—Allows only unicast packets with authenticated
destination MAC addresses.

NeedToKnowWithBroadcast—Allows only unicast packets and
broadcasts with authenticated destination MAC addresses.

NeedToKnowWithMulticast—Allows unicast packets, multicasts and
broadcasts with authenticated destination MAC addresses.
Intrusion protection action mode, which can be on of the following
modes:

BlockMacAddress—Adds the source MAC address of the illegal
packet to the blocked MAC address list.

DisablePort—Shuts down the port that receives illegal packets
permanently.

DisablePortTemporarily—Shuts down the port that receives illegal
packets for some time.

NoAction—Performs no intrusion protection.
Maximum number of secure MAC addresses allowed on the port
Number of secure MAC addresses stored
Whether the authorization information from the server is ignored or not:

permitted—Authorization information from the RADIUS server takes
effect.

ignored—Authorization information from the RADIUS server does not
take effect.
165