Table of Contents
Advertisement
View
System view
Default level
3: Manage level
Parameters
isp-name: Name of the ISP domain, a string of 1 to 24 characters.
Description
Use the domain default enable command to specify the default ISP domain. Users without any domain
name carried in the usernames are considered to be in the default domain.
Use the undo domain default enable command to restore the default.
By default, the default ISP domain is the system predefined ISP domain system.
There can be only one default ISP domain.
The specified domain must already exist; otherwise, users without any domain name carried in the
username cannot pass authentication.
To delete the ISP domain that is used as the default ISP domain, you must change it to a non-default ISP
domain first by using the undo domain default enable command.
Related commands: domain, state, and display domain.
Examples
# Create a new ISP domain named test, and configure it as the default ISP domain.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] quit
[Sysname] domain default enable test
idle-cut enable
Syntax
idle-cut enable minute [ flow ]
undo idle-cut enable
View
ISP domain view
Default level
2: System level
Parameters
minute: Maximum idle duration allowed, in the range 1 to 120 minutes.
flow: User idle threshold, which is in the range 1 to 10240000 bytes and defaults to 10240.
Description
Use the idle-cut enable command to enable the idle cut function and set the relevant parameters. With
the idle cut function enabled for a domain, the system logs out any user in the domain whose traffic is less
than the specified minimum traffic during the idle timeout period.
22
Advertisement
Table of Contents
