Call Block Settings; Set Smart Call Blocker On/Off; Set Profile - AT&T BL102-3 Complete User's Manual

Smart call blocker

Call block settings

Set Smart call blocker on/off

The Smart call blocker feature is set to on by default.
1. Press CALL BLOCK on the handset when it is not in
use, and then press
SCB On/Off.
-OR-
Press MENU/
handset is not in use. Press q
Smart call blk, then press
2. Press q or p
CID
/SELECT to save the setting. You hear a confirmation tone.
MENU
NOTE: If you set SCB On/Off to Off, all settings under Set profile (see below) will be invalid.

Set profile

There are five profile setting options, which allows you to quickly set up
Smart call blocker.
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/
use. Press q
CID
/SELECT.
MENU
2. Press q or p
CID
/SELECT.
MENU
3. Press q or p
CID
/SELECT.
MENU
Screen unknown - screen any calls without numbers or with numbers
f
not saved in the Directory, Allow list, or Star name list.
This profile setting sets the telephone to screen all unknown calls and asks the callers to
−
say their names before putting the calls through to you. See Screen unknown calls on
page 68.
Screen robot - screen robocalls.
f
This profile setting sets the telephone to screen all unknown calls and asks the callers to
−
press the pound key (#) before putting the calls through to you. See Screen robocalls
on page 70.
Allow unknown (default setting) - allow all unknown calls to ring,
f
except calls with numbers saved in the block list.
This profile setting sets the telephone to allow all unknown calls to get through and ring.
−
Calls with numbers saved in the block list will be rejected.
/SELECT to select
MENU
to enter the main menu when the
SELECT
MENU
to highlight On or Off, then press
DIR
to enter the main menu when the handset is not in
SELECT
to scroll to Smart call blk, then press
or p
DIR
to scroll to Set profile, then press
DIR
to select one of the following options, then press
DIR
or p to scroll to
CID DIR
/SELECT twice.
48