Wiring; How To Connect The Units - Furuno FSV25 Installation Manual

2.

WIRING

2.1

How to Connect the Units

FSV-25 Interconnections
DPYC-6
12-24 VDC
10S2383 (3 m)
FR-FTPC-CY
(Max. 100 m)
Transceiver unit
FSV-251
DPYCY-2.5
100/110/115/
Effective length: 5/10/20 m × 10
220/230 VAC,
1ø, 50/60 Hz
Installation of equipment
The processor unit, transceiver unit, power supply unit and hull unit must have a pro-
tective earth. Use a ground wire (IV-8sq., local supply) or a ground plate. A ground
strap is supplied with the transceiver unit and power supply unit.
Processor Unit
FSV-2503/FSV-2503S
USB cable
19S1050 (3 m)
IF Unit
10S2884
FSV-8502
5 m/10 m
10S2380
(Max. 100 m)
(When installed in a separate
10CA10053
10 m (5/20 m optional)
DPYCY-1.5
Power supply unit
FSV-252
S10-20-5/10/20
DVI-D/D S-LINK (5/10 m)
DVI-D/D S-LINK (5/10 m)
Sub control unit
FSV-853 (Option)
Control unit
FSV-2501
Raise/lower control box
FSV-2530
location, the control box
extension box FSV-2560
must be installed)
TPYCY-4
200-220 VAC
3ø, 50/60 Hz
Junction Box
FSV-2550
5 m (from clamps at
top of transducer)
Monitor (User supply)
SXGA/UXGA/WUXGA
Monitor (User supply)
SXGA/UXGA/WUXGA
Remote
Controller
FSV-2504
Hull unit
FSV-253
(1200 mm stroke)
FSV-254
(1600 mm stroke)
2-1