Siemens SIMATIC ET 200SP Manual page 31

Technical specifications
6.1 Technical specifications
Input voltage
Type of input voltage
Rated value, DC
Input current
For 10 k connected contact
•
•
For unconnected contact
•
•
For NAMUR sensors
•
•
Input delay (for rated value of input voltage)
Tolerated switchover time for changeover contacts 300 ms
For NAMUR inputs
•
•
Cable length
Cable length shielded, max.
Sensors
Connectable sensors
NAMUR sensor / changeover contact according to
EN 60947
Single contact / changeover contact unconnected
Single contact / changeover contact connected
with 10 kΩ
Interrupts/diagnostics/status information
Interrupts
Diagnostics interrupt
Hardware interrupt
Diagnostics alarms
Diagnostics information can be read
Monitoring of supply voltage
Wire break
Short-circuit
Group error
30
For signal "0"
For signal "1"
For signal "0", max. (permissible quiescent
current)
For signal "1"
For signal "0"
For signal "1"
with "0" to "1", max.
with "1" to "0", max.
6ES7131-6TF00-0CA0
DC
8.2 V
0.35 mA to 1.2 mA
2.1 to 7 mA
0.5 mA
typ. 8 mA
0.35 mA to 1.2 mA
2.1 to 7 mA
12 ms
12 ms
200 m
Yes
Yes
Yes
Yes; channel-based
Yes, selectable, channels 0 to 7
Yes
Yes
Yes
Yes
Yes
DI 8xNAMUR HF digital input module (6ES7131-6TF00-0CA0)
Manual, 02/2014, A5E03894478-01