Siemens SIMATIC ET 200SP Manual page 13

Parameters/address space
4.1 Parameters
Parameters
Hardware interrupts •
•
•
•
Sensor type
•
•
•
•
•
•
•
Pulse stretching
•
•
•
•
Inverted
•
•
Potential group
•
•
Changing parameter settings and effects on the technology functions
Reconfiguring a technology function resets its responses. Reconfiguring one technology
function has no effect on other technology functions. Exception: Signal inversion and chatter
monitoring, because an additional edge change is generated when signal inversion is
disabled/enabled.
12
Value range
Deactivated
Deactivated
Rising edge
Falling edge
Falling and rising
edge
NAMUR
Channel deactivated
sensor
NAMUR sensor
Single contact,
unconnected
Single contact,
connected with 10 kΩ
NAMUR changeover
contact
Changeover contact,
unconnected
Changeover contact,
connected with 10 kΩ
None
None
0.5 s
1 s
2 s
Disable
Disable
Enable
Use potential
Use potential group of
group of the
the left module
left module
Enable new potential
group
Default Changing
parameter
settings in RUN
Yes
Yes
Yes
Yes
No
DI 8xNAMUR HF digital input module (6ES7131-6TF00-0CA0)
Effective range with configuration
software, e.g. STEP 7 (TIA-Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Channel -
Channel Channel
Channel -
Channel Channel
Module Module
Manual, 02/2014, A5E03894478-01