Navigation Panel - ZyXEL Communications VMG3312-T20A User Manual

After you click the right arrow icon on the Connection Status (Network Map) page, the Status screen is
displayed. See

2.2.3 Navigation Panel

Use the menu items on the navigation panel to open screens to configure VMG features. The following
tables describe each menu item.
Table 6 Navigation Panel Summary
LINK
Connection Status
Network Setting
Broadband
Wireless
Home
Networking
Routing
Chapter 2 The Web Configurator
Chapter 5 on page 67 for more information about the Status screen.
TAB FUNCTION
This screen shows the network status of the VMG and computers/devices
connected to it.
Broadband Use this screen to view and configure ISP parameters, WAN IP address
assignment, and other advanced properties. You can also add new
WAN connections.
Cellular Backup Use this screen to configure cellular WAN connection.
Advanced Use this screen to enable or disable PTM over ADSL, Annex M/Annex J,
and DSL PhyR functions.
General Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
Guest/More AP Use this screen to configure multiple BSSs on the VMG.
MAC Use this screen to block or allow wireless traffic from wireless devices of
Authentication certain SSIDs and MAC addresses to the VMG.
WPS Use this screen to configure and view your WPS (Wi-Fi Protected Setup)
settings.
WMM Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
Others Use this screen to configure advanced wireless settings.
Channel Status Use this screen to scan wireless LAN channel noises and view the results.
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional Use this screen to configure IP alias and public static IP.
Subnet
STB Vendor ID Use this screen to configure the Vendor IDs of the connected Set Top Box
(STB) devices, which have the VMG automatically create static DHCP
entries for the STB devices when they request IP addresses.
Wake on LAN Use this screen to remotely turn on a device on the local network.
TFTP Server Name Configure a TFTP server name which is sent to clients using DHCP option
66.
Static Route Use this screen to view and set up static routes on the VMG.
DNS Route Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS server(s).
Policy Route Use this screen to configure policy routing on the VMG.
RIP Use this screen to configure Routing Information Protocol to exchange
routing information with other routers.
VMG3312-T20A User's Guide
29