ZyXEL Communications VMG3312-T20A User Manual page 242

Figure 147 E-mail Notification > Add New E-mail
The following table describes the labels in this screen.
Table 116 E-mail Notification > Add
LABEL DESCRIPTION
Mail Server Enter the server name or the IP address of the mail server for the e-mail address specified in the
Address Account E-mail Address field.
If this field is left blank, reports, logs or notifications will not be sent via e-mail.
Port Enter the same port number here as is on the mail server for mail traffic.
Authentication Enter the user name (up to 32 characters). This is usually the user name of a mail account you
Username specified in the Account E-mail Address field.
Authentication Enter the password associated with the user name above.
Password
Account E-mail Enter the e-mail address that you want to be in the from/sender line of the e-mail notification
Address that the VMG sends.
If you activate SSL/TLS authentication, the e-mail address must be able to be authenticated by
the mail server as well.
Connection Select SSL to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you want
Security encrypted communications between the mail server and the VMG.
Select STARTTLS to upgrade a plain text connection to a secure connection using SSL/TLS.
OK Click this button to save your changes and return to the previous screen.
Cancel Click this button to exit this screen without saving.
Chapter 31 E-mail Notification
VMG3312-T20A User's Guide
242