Side Panels - ZyXEL Communications VMG3312-T20A User Manual

Table 1 LED Descriptions (continued)
LED
DSL
WAN
INTERNET
USB

1.6.3 Side Panels

The following graphics display the side panels of the VMG.
Chapter 1 Introducing the VMG
COLOR STATUS DESCRIPTION
Green On The VDSL line is up.
Blinking The VMG is initializing the VDSL line.
Off The DSL line is down.
Orange On The ADSL line is up.
Slow The VMG is detecting carrier signals.
Blinking
Fast The VMG is initializing the VDSL line.
Blinking
Green On The VMG has a successful 10/100/1000 Mbps Ethernet connection on the
WAN.
Blinking The VMG is sending or receiving data to/from the WAN at 10/100/1000
Mbps.
Off The VMG does not have an Ethernet connection with the WAN.
Green On The VMG has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server). PPP negotiation was successfully completed (if used) and the DSL
connection is up.
Blinking The VMG is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
Red On The VMG attempted to make an IP connection but failed. Possible causes
are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
Green On The VMG recognizes a USB connection through the USB slot.
Blinking The VMG is sending/receiving data to/from the USB device connected to it.
Off The VMG does not detect a USB connection through the USB slot.
VMG3312-T20A User's Guide
21