Table of Contents
Advertisement
Configuring Fabric Binding
Verifying the Fabric Binding Configuration
To display fabric binding information, perform one of the following tasks:
Command
show fabric-binding database [active]
show fabric-binding database [active] [vsan
vsan-id]
show fabric-binding statistics
show fabric-binding status
show fabric-binding violations
show fabric-binding efmd [vsan vsan-id]
This example shows how to display the active fabric binding information for VSAN 4:
switch# show fabric-binding database active vsan 4
This example shows how to display fabric binding violations:
switch# show fabric-binding violations
-------------------------------------------------------------------------------
VSAN Switch WWN [domain]
-------------------------------------------------------------------------------
2
3
4
In VSAN 3, the sWWN was not found in the list. In VSAN 2, the sWWN was found in the list, but has a
Note
domain ID mismatch.
This example shows how to display EFMD Statistics for VSAN 4:
switch# show fabric-binding efmd statistics vsan 4
Default Settings for Fabric Binding
The following table lists the default settings for the fabric binding feature.
OL-30895-01
20:00:00:05:30:00:4a:1e [0xeb] Nov 25 05:46:14 2003
20:00:00:05:30:00:4a:1e [*] Nov 25 05:44:58 2003
20:00:00:05:30:00:4a:1e [*] Nov 25 05:46:25 2003
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
Displays the configured fabric binding database. You
can add the active keyword to display only the active
fabric binding database.
Displays the configured fabric binding database for
the specified VSAN.
Displays statistics for the fabric binding database.
Displays fabric binding status for all VSANs.
Displays fabric binding violations.
Displays the configured fabric binding database for
the specified VSAN.
Last-Time
[Repeat count] Reason
Verifying the Fabric Binding Configuration
[2]
Domain mismatch
[2]
sWWN not found
[1]
Database mismatch
273
Advertisement
Table of Contents
