Configuring Fibre Channel Routing Services and Protocols
Procedure
Step 1
FSPF Routes
FSPF routes traffic across the fabric, based on entries in the FSPF database. These routes can be learned
dynamically or configured statically.
Fibre Channel Routes
Each port implements a forwarding logic, which forwards frames based on its FC ID. Using the FC ID for
the specified interface and domain, you can configure the specified route (for example, FC ID 111211 and
domain ID 3) in the switch with domain ID 1 (see the following figure).
Figure 38: Fibre Channel Routes
Configuring Fibre Channel Routes
You can configure a Fibre Channel route.
Procedure
Step 1
OL-30895-01
Command or Action
switch# clear fspf counters vsan
vsan-id interface fc slot/port
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
Purpose
Clears the FSPF statistics counters for the specified
interface in the specified VSAN.
If this is a QSFP+ GEM, the slot/port syntax is
Note
slot/QSFP-module/port.
Purpose
Enters global configuration mode.
FSPF Routes
177