Activation And Auto-Learning Configuration Distribution - Cisco Nexus 5500 Series NX-OS Configuration Manual

Configuring Port Security
If you discard (abort) the changes made to the pending database, the configuration remains unaffected and
the lock is released.
Procedure
Step 1
Step 2

Activation and Auto-Learning Configuration Distribution

Activation and auto-learning configurations in distributed mode are remembered as actions to be performed
when you commit the changes in the pending database.
Learned entries are temporary and do not have any role in determining if a login is authorized or not. As such,
learned entries do not participate in distribution. When you disable learning and commit the changes in the
pending database, the learned entries become static entries in the active database and are distributed to all
switches in the fabric. After the commit, the active database on all switches are identical and learning can be
disabled.
If the pending database contains more than one activation and auto-learning configuration when you commit
the changes, the activation and auto-learning changes are consolidated and the resulting operation may change
(see the following table).
OL-30895-01
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
port-security abort vsan vsan-id
Example:
switch(config)# port-security abort vsan
35
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
Port Security Configuration Distribution
Purpose
Enters global configuration mode.
Discards the port security changes in the
specified VSAN and clears the pending
configuration database.
259