Table of Contents
Advertisement
Configuring and Managing Zones
• Hard and soft zoning are implemented using the active zone set. Modifications take effect during zone
set activation.
• An FC ID or Nx port that is not part of the active zone set belongs to the default zone and the default
zone information is not distributed to other switches.
Note
If one zone set is active and you activate another zone set, the currently active zone set is automatically
deactivated. You do not need to explicitly deactivate the currently active zone set before activating a new
zone set.
OL-30895-01
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
Information About Zoning
131
Advertisement
Table of Contents
