Table of Contents
Advertisement
Advanced Fibre Channel Features
Verifying Interoperating Status
This section highlights the commands used to verify if the fabric is up and running in interoperability mode.
To verify the resulting status of entering the interoperability command in any Cisco Nexus device, perform
this task:
Procedure
Step 1
Verify the software version.
Example:
switch# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2008, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS:
loader:
kickstart: version 4.0(1a)N1(1)
system:
BIOS compile time:
kickstart image file is: bootflash:/n5000-uk9-kickstart.4.0.1a.N1.latest.bin
kickstart compile time:
system image file is:
system compile time:
Hardware
cisco Nexus5020 Chassis ("40x10GE/Supervisor")
Intel(R) Celeron(R) M CPU with 2074308 kB of memory.
Processor Board ID JAB120900PJ
Device name: switch
bootflash: 1003520 kB
Kernel uptime is 0 day(s), 1 hour(s), 29 minute(s), 55 second(s)
Last reset at 510130 usecs after Wed Nov 26 18:12:23 2008
Reason: Reset Requested by CLI command reload
System version: 4.0(1a)N1(1)
Service:
OL-30895-01
Command or Action
version 1.2.0
version N/A
version 4.0(1a)N1(1)
06/19/08
11/25/2008 6:00:00 [11/25/2008 14:17:12]
bootflash:/n5000-uk9.4.0.1a.N1.latest.bin
11/25/2008 6:00:00 [11/25/2008 14:59:49]
Cisco Nexus 5500 Series NX-OS SAN Switching Configuration Guide, Release 7.x
Purpose
• Do not force a fabric reconfiguration.
switch(config# fcdomain restart vsan 1
Switch Interoperability
225
Advertisement
Table of Contents
