Code 93; Enable/Disable Code 93 - Motorola Symbol MS4404 Integration Manual

11 - 36 Symbol MS4404/MS4407 Integration Guide

Code 93

Enable/Disable Code 93

Parameter # 09h
To enable or disable Code 93, capture the appropriate bar code below.
Enable Code 93
Set Lengths for Code 93
Parameter # L1 = 1Ah, L2 = 1Bh
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 93 to any length, one or two discrete lengths, or lengths within a specific
range.
•
One Discrete Length - Select this option to decode only Code 93 symbols containing a selected length.
Select the length using the numeric bar codes in
only Code 93 symbols with 14 characters, capture Code 93 - One Discrete Length, then capture 1 followed
by 4. To correct an error or to change the selection, capture Cancel on
•
Two Discrete Lengths - Select this option to decode only Code 93 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
example, to decode only Code 93 symbols containing either 2 or 14 characters, select Code 93 - Two
Discrete Lengths, then capture 0, 2, 1, and then 4. To correct an error or to change the selection,
capture Cancel on
•
Length Within Range - Select this option to decode a Code 93 symbol with a specific length range.
Select lengths using the numeric bar codes in
Code 93 symbols containing between 4 and 12 characters, first capture Code 93 - Length Within Range.
Then capture 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or change
the selection, capture Cancel on
•
Any Length - Capture this option to decode Code 93 symbols containing any number of characters within
the imager's capability.
(01h)
page D-3.
page
*
Appendix D, Numeric Bar
Appendix D, Numeric Bar
Appendix D, Numeric Bar Codes.
D-3.
Disable Code 93
(00h)
Codes. For example, to decode
page D-3.
Codes. For
For example, to decode