Gain - Motorola Symbol MS4404 Integration Manual

Gain

Parameter # F4h, F0h, A7h
This parameter only applies if you disabled Decoding or Image Capture Autoexposure. Gain is a means of
amplifying the raw image data before it is converted into 256 grayscale values. Increasing the gain increases
brightness and contrast, but also increases noise (undesired electrical fluctuations in the image) which makes the
image less attractive and/or harder to decode.
To set the manual gain, capture the bar code below followed by 3 bar codes from
in the range of 79 to 127, representing the value. The default is 100.
Set Gain
Imager Preferences 7 - 11
Appendix D, Numeric Bar Codes,