Transmit Macro Pdf Control Header; Escape Characters - Motorola Symbol MS4404 Integration Manual

11 - 82 Symbol MS4404/MS4407 Integration Guide

Transmit Macro PDF Control Header

Parameter # B8h
Enable this to activate transmission of the control header, which contains the segment index and the file ID, in
Macro PDF symbols. For example, the field may be: \92800000\725\120\343. The five digits after the \928 are the
segment index (or block index), and \725\120\343 is the file ID.
Enable this when selecting Transmit Any Symbol in Set / No Particular Order for the
Decode Mode Symbols on page
PDF When Complete. This parameter has no effect if you selected Passthrough All Symbols.
Enable Macro PDF Control Header Transmit

Escape Characters

Parameter # E9h
This enables the backslash (\) character as an Escape character for systems that can process transmissions
containing special data sequences. Capture a bar code below to either format special data according to the GLI
(Global Label Identifier) protocol, or to disable this parameter. This parameter only affects the data portion of a
Macro PDF symbol transmission; the Macro PDF Control Header (if enabled) is always sent with GLI formatting.
GLI Protocol
11-81, and disable this when selecting Buffer All Symbols / Transmit Macro
(01h)
(02h)
*
Disable Macro PDF Control Header Transmit
(00h)
*
None
(00h)
Macro PDF Transmit /