Code 93; Enable/Disable Code 93 - Motorola Symbol LS9208 Product Reference Manual

11 - 36 Symbol LS9208/LS9208i Product Reference Guide

Code 93

Enable/Disable Code 93

To enable or disable Code 93, scan the appropriate bar code below.
Set Lengths for Code 93
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 93 for any length, one or two discrete lengths, or lengths within a specific
range.
NOTE When setting lengths for different bar code types, include a leading zero for single digit numbers.
One Discrete Length - Select this option to decode only Code 93 symbols containing a selected length. Select the
length using the numeric bar codes in
symbols with 14 characters, scan Code 93 - One Discrete Length, then scan 1 followed by 4. To correct an error
or to change your selection, scan Cancel on
Enable Code 93
*
Disable Code 93
Appendix D, Numeric Bar
page D-4.
Code 93 - One Discrete Length
Codes. For example, to decode only Code 93