Martin Audio CCD5 User Manual page 19

CDD
USER GUIDE
Fit the wall bracket in the orientation shown below for operation with adjustment in two planes,
or for horizontal adjustment only:
If only vertical adjustment is required, fit as shown below:
Fixings appropriate for the wall surface and weight of the cabinet (2.7 kg) must be used to
ensure a safe and secure installation. It is good practice to terminate the speaker cables with
the mating Phoenix connectors (supplied with the cabinets) at this stage.
If second fix is to follow at a later date, it is a good idea to screw the pivot bolt into the wall
bracket so it does not get lost.
Second fix:
The CDD5 may be mounted in either "portrait" (vertical) or "landscape" (horizontal) orientation.
This decision is purely based on the desired visual impact in the space in which the speakers
are being installed.
Note that is vital that the driver is orientated to suit the deployment used. "Out of the box"
the driver is in the correct position for "portrait" use and must be rotated through 90° for
"landscape" use. Please see page 12 for details of driver rotation.
CDD User Guide V1.0
19