Yoke Assemblies; Eye Bolts - Martin Audio CCD5 User Manual

CDD
USER GUIDE

YOKE ASSEMBLIES

Yoke assemblies are available for CDD Models CDD10, CDD12 and CDD15. In the case of the
CDD15, a yoke assembly is the only mounting bracket available.
For fixed installations, the yoke assembly may be installed either vertically, allowing pan
adjustment of the cabinet, or horizontally, allowing tilt adjustment. Two fixing holes are provided
in the main strut for this purpose.
Alternatively, if the cabinet is to be suspended from a scaf pole or other standard rigging, the
yoke may be fitted with a half-coupler clamp using a third (centrally-located) 13 mm dia. hole in
the yoke's main strut. Only horizontal orientation is possible with this method.
See page 12 for important information regarding driver rotation for use in horizontal orientation.
Note that the yoke assemblies for the CDD10 and CDD15 are identical in design to the yoke
assembly for the CDD12; only that for the CDD12 is pictured below.
Model CDD10:
Yoke Assembly CDDYA10B (black), CDDYA10W (white)
Model CDD12:
Yoke Assembly CDDYA12B (black), CDDYA12W (white)
Model CDD15:
Yoke Assembly CDDYA15B (black), CDDYA15W (white)

EYE BOLTS

All CDD Series models may be flown using optional eye bolts
Shouldered Eye bolts, Part No. HTKCT05 (8 mm dia.), HTKCT06 (10 mm dia.)
CDD User Guide V1.0
11