Martin Audio CCD5 User Manual page 22

CDD
USER GUIDE
Do not fully tighten the bolt at this stage, leave a little play to allow final adjustment. If the
fitment includes the link bracket, this may also be loosened slightly for final adjustment. The
CDD5 can now be positioned using the locating radial teeth on the bracket to hold it in position,
these will allow adjustment in increments of approximately 10° in both horizontal and vertical
planes. Final adjustment is best done with an audio source to check the coverage. When the final
position is found, tighten the securing bolt(s).
CDD User Guide V1.0
22