Martin Audio CCD5 User Manual page 32

CDD
USER GUIDE
The vertical dispersion can be adjusted using the grub screw accessed from the rear of the
bracket:
It is also possible to ceiling mount the CDD6 or CDD8 in portrait mode, but in this case the
cabinet should be mounted upside down, and the driver and grille will both need to be rotated
180°. The sloping bottom of the cabinet allows a close fit to the ceiling which may be more
aesthetically pleasing in some installations.
The cabinet section of the wall bracket should be fitted at 90° relative to the fitment used for
landscape orientation. In the case of the CDD8, which has six rear fixing points, use the four
"lower" ones; the CDD6 only has four fixing points.
CDD User Guide V1.0
32