Martin Audio CCD5 User Manual page 38

CDD
USER GUIDE
The most common method for suspending cabinets in portrait mode is to use the front two
positions on the cabinet top as the primary suspension points with a third at the rear to provide
any required downward tilt. The third position may be the rear insert on the cabinet top of the
cabinet or the one on the back of the cabinet, if a steeper tilt is required.
In horizontal mode, the third flying point (to adjust tilt) can be obtained by removing one of the
six screws on the rear of the cabinet:
Always ensure that the rigging method and components used are suitable for both the weight of
the cabinets and the suspension points at height.
CDD User Guide V1.0
38