General Maintenance; Transporting Cleaner - Dirt Devil M086035 Owner's Manual

GENERAL MAINTENANCE
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
DEBRIS REMOVAL/HOSE
1. 2.
1. Check to see if bag is full; empty if needed.
2. Plug cleaner in and check to see if there is any suction at end of hose (Diagram 2). If there is suction at end of hose,
move on to Diagram 3. If there is no suction at the end of hose, unwrap hose from caddy. Remove the hose from
the side of the cleaner by pulling out the hose grip (Diagram 2a). Check hose and remove obstruction.
3. Remove nozzle guard (see Diagram 3) by removing the three (3) screws. Remove obstruction.
DEBRIS REMOVAL/POWER BRUSH TOOL
4. 5.
LOCKING RING
Rotate locking ring 180˚ and Pivot lower housing and
turn Power Brush Tool over. remove clog.
HOW TO TRANSPORT CLEANER
Use the carrying handle on the back of the cleaner to move cleaner from room to room (See Pg. 5, #13 for location).
NOTE: Do not push cleaner forward while leaning on back casters, pull cleaner on back casters, or attempt to
lift cleaner using upper handle.
DEBRIS REMOVAL/
NOZZLE GUARD
3.
2a.
6.
To reassemble, be sure tabs
are engaged. Pivot the lower
housing closed.
11