Vlan Configuration - HP ProLiant BL p-Class GbE2 Command Reference Manual

The Configuration Menu

VLAN Configuration

Command: /cfg/vlan <VLAN number>
[VLAN 1 Menu]
The commands in this menu configure VLAN attributes, change the status of the VLAN,
delete the VLAN, and change the port membership of the VLAN. For more information on
configuring VLANs, refer to the "Setup Part 3: VLANs" section in Chapter 3.
By default, the VLAN menu option is disabled except VLAN 1, which is always enabled.
The GbE2 Interconnect Switch supports a maximum of 255 VLANs.
NOTE: Refer to the HP ProLiant BL p-Class GbE2 Interconnect Switch Application Guide for
information on VLANs.
The following table describes the VLAN Configuration Menu options.
Table 6-14: VLAN Configuration Menu Options
Command
name
stg <spanning tree group index>
add <port number>
rem <port number>
def <list of port numbers>
ena
dis
del
cur
6-18
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:57 PM
name - Set VLAN name
stg - Assign VLAN to a Spanning Tree Group
add - Add port to VLAN
rem - Remove port from VLAN
def - Define VLAN as list of ports
ena - Enable VLAN
dis - Disable VLAN
del - Delete VLAN
cur - Display current VLAN configuration
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
Description
Assigns a name to the VLAN or changes the existing
name. The default VLAN name is the first one.
Assigns a VLAN to a spanning tree group.
Adds ports or trunk groups to the VLAN
membership.
Removes ports or trunk groups from this VLAN.
Defines which ports are members of this VLAN.
Every port must be a member of at least one VLAN.
By default, it defines ports to VLAN 1.
Enables this VLAN.
Disables this VLAN without removing it from the
configuration.
Deletes this VLAN.
Displays the current VLAN configuration.