Table of Contents
Advertisement
Idle Timeout
By default, the GbE2 Interconnect Switch will disconnect your console, Telnet, or SSH
session after five minutes of inactivity. This function is controlled by the idle timeout
parameter, which can be set from 1 to 60 minutes. For information on changing this
parameter, refer to the "System Configuration" section in Chapter 6.
Typographical Conventions
The following table describes the typographic styles used in this guide:
Table 1-3: Typographic Conventions
Typeface or
Symbol
AaBbCc123
AaBbCc123
<AaBbCc123>
[ ]
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:46 PM
Meaning
This type depicts onscreen computer
output and prompts.
This type displays in command examples
and shows text that must be typed in
exactly as shown.
This italicized type displays in command
examples as a parameter placeholder.
Replace the indicated text with the
appropriate real name or value when
using the command. Do not type the
brackets.
This also shows guide titles, special
terms, or words to be emphasized.
Command items shown inside brackets
are optional and can be used or excluded
as the situation demands. Do not type the
brackets.
The Command Line Interface
Example
Main#
Main# sys
To establish a Telnet session,
enter:
host# telnet <IP address>
Read your User's Guide
thoroughly.
host# ls [-a]
1-7
Advertisement
Table of Contents
