Hot-Plug Drive Blanks - HP proliant ML110 gen9 Maintenance And Service Manual

Remove the non-hot-plug drive.
11.
To replace the component, reverse the removal procedure.

Hot-plug drive blanks

CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
To remove the component:
Remove the front bezel (on page 25).
1.
Remove the drive blank.
2.
Hot-plug LFF drive blank
o
To replace the LFF drive blank, slide the component into the bay until it clicks.
Removal and replacement procedures 29