Hot-Plug Drive Blanks - HP ProLiant ML110 Gen9 Maintenance And Service Manual

Remove the non-hot-plug drive.
11.
To replace the component, reverse the removal procedure.

Hot-plug drive blanks

CAUTION:
all bays are populated with either a component or a blank.
To remove the component:
Remove the front bezel (on page 26).
1.
Remove the drive blank.
2.
Hot-plug LFF drive blank
o
To replace the LFF drive blank, slide the component into the bay until it clicks.
To prevent improper cooling and thermal damage, do not operate the server unless
Removal and replacement procedures 30