Separation Roller - Ricoh FAX550 Service Manual

REPLACEMENT AND ADJUSTMENT
SCANNER
5.2.2. Separation Roller [F]
[A]
[C]
[D]
[D]: 2 screws
[E]: 4 screws
[F]
[F]: 2 screws
•
When removing [A], lift it up by the part that hangs down just above the
document feed area, and ease it off over the cover release button.
•
When replacing [A], pull down the part of the cover that hangs above
the document feed-out area, so that the pegs on the inside of the cover
fit into the slots in the bracket above the document feed-out area.
Caution: Do not touch the rubber surface of the new rollers, or
document feed problems will occur sooner than normal.
There are no separation roller adjustments in this model.
[B]: 2 screws (1 with ground)
[C]: 1 screw
5-3
November 30th, 1991
[B]
[E]
5