Table of Contents
Advertisement
OVERALL MACHINE INFORMATION
COMPONENT LAYOUT
1.3. COMPONENT LAYOUT
1.3.1. Mechanical Components
1
2
3
4
19
18
17
16
15
1.
R2 Rollers
2.
Exposure Glass
3.
Xenon Lamp
4.
R1 Rollers
5.
Separation Roller
6.
Document Feed Roller
7.
Separation Plate
8.
Pick-up Roller
9.
Lens Block
10.
CCD (Charge Coupled
Device)
11.
Thermal Paper Roll
12.
Shading Plate
13.
Second Mirror
14.
Thermal Head
15.
Platen Roller
16.
Cutter
17.
Feed-out Rollers
18.
First Mirror
19.
Third Mirror
5
6
7
8
14
13
12
Feed the document through the scanner.
Exposes the original to light from the xenon lamp.
Illuminates the document.
Feed the document through the scanner.
Allows one page into the scanner.
Feeds the document into the scanner.
Spreads out the leading edges of the pages fed into the
scanner.
Picks up pages of the document from the document
table.
Focuses light reflected from the document onto the
CCD.
This converts the light reflected from the document into
an analog video signal.
Thermal paper for printing.
Allows more light through from the ends of the xenon
lamp than from the center, to counteract the relative
dimness at the ends of the lamp.
Reflects light from the document towards the CCD.
Prints received data on the thermal paper.
Feeds the paper through the printer.
Cuts off the printed page.
Feed out the page which has been cut off.
Reflects light from the document towards the CCD.
Reflects light from the document towards the CCD.
1-5
November 30th, 1991
9
10
1
11
Advertisement
Table of Contents
