Suspended Ceiling Adjustable T-Rail Clips - Cisco Aironet 1130AG Series Hardware Installation Manual

Before Beginning the Installation
•

Suspended Ceiling Adjustable T-Rail Clips

The accessory kit contains two suspended ceiling adjustable T-rail clips; one for standard ceiling tile
rails and the other for recessed ceiling tile rails. The clips are adjustable to accomodate three standard
T-rail widths. Each clip contains detents that are used to adjust the clip to the T-rail. Each detent contains
markings that indicate the T-rail width and the hole letter that corresponds to the correct mounting holes
on the mounting plate.
Figure 2-3
1
2
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
2-6
C I S C O C O N F I D E N T I A L -
Padlock hole—used to attach a padlock to secure the access point to the mounting plate. Compatible
padlocks are Master Lock models 120T and 121T
be used with the padlock for increase security protection.
The security hasp covers the cable bay area ( including the power port, Ethernet port, console
Note
port, and the mode button) to prevent the installation or removal of the cables or the
activation of the mode button.
Figure 2-3
T-Rail Clip Features
Adjustable T-rail clip
Mounting plate screw holes
(8x32 flat head screw)
D r a f t 2
or equivalent. The security hasp adapter can also
shows the details of the adjustable T-rail clips.
3 T-rail locking screw
4 T-rail width adjustment detents (A, B, C)
correspond to the A, B, and C holes on the
mounting plate
Chapter 2 Installing the Access Point
OL-6226-01