Securing The Access Point To The Mounting Plate - Cisco Aironet 1130AG Series Hardware Installation Manual

Securing the Access Point

Securing the Access Point to the Mounting Plate

The mounting plate contains a security padlock hole and a security screw hole to enable you to secure
your access point to the mounting plate to restrict it's removal. You can use a security-type screw (that
you provide) to attach the access point to the mounting plate using the security screw hole (see
Figure
Using a security-type screw to secure the access point to the mounting plate does not prevent someone
Note
from inserting or removing the access point cables or pressing the mode button.
You can use the security hasp adapter (supplied) and a padlock (that you provide) to secure your access
point to the mounting plate. Compatible padlocks are Master Lock models 120T or 121T.
The security hasp adapter covers the cable bay area (including the power port, Ethernet port, console
Note
port, and the mode button) to prevent the installation or removal of the cables or the activation of the
mode button.
Follow these instructions to install the security hasp adapter:
Open the access point cover (see the
Step 1
Carefully insert the access point security hasp tab into the notch on the security hasp adapter (see
Step 2
Figure
Figure 2-15 Installing the Security Hasp Adapter
1
2
Push down on the security hasp adapter to ensure the padlock hole is not blocked.
Step 3
Insert a padlock into the padlock hole and lock the padlock.
Step 4
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
2-20
C I S C O C O N F I D E N T I A L -
2-12).
2-15).
Access point security hasp tab
Security hasp notch
D r a f t 2
"Opening the Access Point Cover" section on page
3 Security hasp adapter
Chapter 2 Installing the Access Point
2-8).
OL-6226-01