Mounting On A Suspended Ceiling - Cisco 7330 Quick Start Manual

Mounting on a Suspended Ceiling

If you need to mount your small cell on a suspended ceiling,
follow these steps:
Place your small cell on a clean, flat surface with the
Step 1
bottom side facing you.
Take two screws from the accessory kit and screw them
Step 2
into each of the two corresponding holes on the bottom
of the small cell.
Attach the suspended ceiling bracket to the ceiling rail
Step 3
system using the two "L" brackets included in the
accessory pack and eight screws.
Place the small cell such that the attached mounting
Step 4
screws fit into the suspended ceiling bracket keyhole
mounting slots.
Slide the small cell onto the mounting bracket until it
Step 5
clicks into place.
13