Cisco Aironet 1130AG Series Hardware Installation Manual page 49

Configuring the Access Point for the First Time
This chapter describes how to configure basic settings on your access point for the first time. The
contents of this chapter are similar to the instructions in the quick start guide that shipped with your
access point. You can configure all the settings described in this chapter using the CLI, but it might be
simplest to browse to the access point's web-browser interface to complete the initial configuration and
then use the CLI to enter additional settings for a more detailed configuration.
This chapter contains these sections:
Before You Start, page 3-2
•
Obtaining and Assigning an IP Address, page 3-3
•
Connecting to the Access Point Locally, page 3-3
•
Assigning Basic Settings, page 3-4
•
• Protecting Your Wireless LAN, page 3-9
Using the IP Setup Utility, page 3-9
•
• Assigning an IP Address Using the CLI, page 3-11
Using a Telnet Session to Access the CLI, page 3-11
•
OL-6226-01
C I S C O C O N F I D E N T I A L -
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
D r a f t 2
C H A P T E R
3
3-1