Left Cover - Olivetti DR N17 Service Manual

8.3.3 500 Left Cover

NOTE: The removal procedure for the 500 Left Cover is the same for Feeders 2 and 3.
Removal
1 Remove Feeder 2 (3) ( REP 8.3.1 Feeder 2 and 3 (Optional) ).
2 Remove the two screws on the bottom side.
3 Remove the one screw on the front side.
4 Disconnect P/J216 from the 500 Paper Size PWB Assembly.
5 Remove the 500 Left Cover.
Replacement
Perform the removal steps in reverse order.
8-12
Figure 8.3.3.1 Removing the 500 Left Cover
SAS472FC
687200Q