Laser Assembly - Olivetti DR N17 Service Manual

4.10.3 Laser Assembly

Removal
1 Remove the Top Cover Assembly ( REP 4.2.6 Top Cover Assembly ).
2 Remove the four screws (hexagon-shaped with a black flange) securing the Laser Assembly, and
lift the Laser Assembly.
3 Disconnect P/J112, P/J113, and P/J114 after lifting the Laser Assembly.
Replacement
Perform the removal steps in reverse order.
687200Q
Figure 4.10.3.1 Laser Assembly Removal
SAS458F.CDR
Service Manual
SAS458F
4-53