Removing And Installing The Bus Board - Siemens SIMATIC IPC627D Operating Instructions Manual

7.4.5

Removing and installing the bus board

Requirement
● The device is opened.
Procedure
Removal
1. Remove all modules from the slots.
2. Remove the drive bay module for hard disks.
3. Remove the power supply.
4. Remove the screws
5. Pull the bus board from the motherboard.
Installation
Proceed in reverse order.
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB
①
on the bus board.
Device maintenance and repair
7.4 Removing and installing hardware
85