Technical Specifications; General Technical Specifications - Siemens SIMATIC IPC627D Operating Instructions Manual

8.4

Technical specifications

8.4.1

General technical specifications

General technical specifications
Order numbers
Dimensions IPC627D
Dimensions IPC827D
Weight IPC627D
Weight IPC827D
Supply voltage AC
Supply voltage DC
Input current AC
Input current DC
Line voltage frequency
Short-term voltage interruption in
accordance with Namur
Max. power consumption AC and
DC
Degree of protection
Protection class
Safety specifications
Noise emission
Quality assurance
The device should only be connected to a 24 V DC power supply which meets the re-
1
quirements of safe extra low voltage (SELV) according to IEC/EN/DIN EN 60950-1. A
protective conductor must also be used (see section "Connecting the 24 VDC power sup-
ply (Page 37)").
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB
See order documents
Without DVD burner/HDD in removable drive bay:
297 × 267 × 80 (B × H × T in mm)
With DVD burner/HDD in removable drive bay: 297 × 267 × 105
Without DVD burner/HDD in removable drive bay:
297 × 267 × 155 (B × H × T in mm)
With DVD burner/HDD in removable drive bay: 297 × 267 × 197
approx. 5 kg
approx. 7 kg
Nominal 100-240 V AC (-15% / +10%) (wide range)
Nominal 24 V DC (-20% / + 20%), SELV
1
Continuous current up to 1.7 A (up to 50 A for 1 ms at startup)
Continuous current up to 7.1 A (up to 13 A for 50 ms at startup)
50-60 Hz (47 to 63 Hz)
Max. 20 ms (at 93 to 264 V)
(max. 10 events/h; recovery time min. 1 s)
Active power 176 W
IP 20 to IEC 60529
Protection class I to IEC 61140
EN 60950-1; UL60950-1; CAN/CSA C22.2 No 60950-1-07;
UL508; CSA C22.2 No 142
< 55 dB(A) according to EN ISO 7779
In accordance with ISO 9001
Technical specifications
8.4 Technical specifications
1
113