Removing And Installing An Ssd Drive - Siemens SIMATIC IPC627D Operating Instructions Manual

6.4.4

Removing and installing an SSD drive

Requirement
● The device is opened.
Procedure
Removal
1. Remove the drive bay module.
2. Disconnect the power supply and
the data cable from the drive.
3. Loosen the screws
4. Remove the drive from the bay.
Installation
Proceed in reverse order.
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB
Expanding and assigning parameters to the device
①
of the drive.
6.4 Drives
69