Notes On Use - Siemens SIMATIC IPC627D Operating Instructions Manual

Safety Instructions

2.2 Notes on use

2.2 Notes on use
NOTICE
Possible functional limitations if operation of plant is not validated
The device has been tested and certified based on technical standards. In rare cases, you
may encounter functional limitations when operating your plant.
To avoid such functional limitations, you should validate the correct operation of the plant.
NOTICE
Ambient conditions
Ambient conditions for which the device is not suitable can cause faults or damage the
device.
Note the following:
• Operate the device only in closed rooms. Failure to comply nullifies the warranty.
• Operate the device only in accordance with the ambient conditions specified in the
• Protect the device against dust, moisture and heat.
• Do not expose the device to direct sunlight or other strong sources of light.
• Without additional measures, such as a supply of clean air, the device may not be used
• Observe the permitted mounting positions of the device.
• Do not obstruct the venting slots of the device.
Note
Use in an industrial environment without additional protective measures
This device was designed for use in a normal industrial environment according to
IEC 60721-3-3.
22
technical specifications.
in locations with harsh operating conditions caused by acidic vapors or gases.
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB