Removing And Installing A Dvd Drive - Siemens SIMATIC IPC627D Operating Instructions Manual

6.4.6

Removing and installing a DVD drive

Requirement
● The device is opened.
Procedure
Removing external drive
1. Remove the internal HDD/SSD drive bay module.
2. Loosen the following connectors of
the optical drive from the mother-
board:
• Power supply connector
• SATA connector
3. Loosen the designated rivets on the
left and right on the cover with a
screwdriver and put the cover down
with the optical drive facing down-
wards.
4. Loosen the designated screws on
the inside of the cover.
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB
Expanding and assigning parameters to the device
①
.
②
6.4 Drives
71