Mitsubishi QJ71C24N User Manual page 244

9 UTILITY PACKAGE (GX Configurator-SC)
QCPU
Q25HCPU
MODE
RUN
ERR.
USER
BAT.
BOOT
A
USB
RS-232
Figure 9.1 Correlation chart for data created with the utility package
9 - 18
<Flash ROM data>
(a) This means the data set in Flash ROM setting and they can be stored in any
directory separately from projects of GX Developer.
(b) Steps 4) and 5) in Figure 9.1 are performed as follows:
4) This operation can be executed from the [Flash ROM setting] screen or
[Monitor/Test] screen of the utility.
[Flash ROM setting] screen
[Monitor/Test] screen
5) This operation can be executed from the [Monitor/Test] screen of the
utility.
[Monitor/Test] screen
<Make text file>
(a) Clicking Make text file on the Auto refresh setting or Monitor/Test screen
creates a text file.
This feature is useful for documentation of users.
GX Developer/
GX Configurator-SC
Project
A
B
3)
5)
[Load file]/[Save file]
[Read from module]/[Write to module]
Disk
Project
1)
A
2)
B
4)
QJ71C24N
A: Intelligent function module parameters
B: Flash ROM data
C: Data created by "Make text file" and saved
B
CH.2
[Load file]/[Save file]
Personal computer
MELSEC-Q
9 - 18