Mitsubishi QJ71C24N User Manual page 223

8 DATA COMMUNICATION USING THE PRE-DEFINED PROTOCOL
Packet name
NOR:RD Data (4 Digits Data)
ERR:NAK Response
8 - 18
5) The "Element setting – Conversion variable" screen is displayed.
In the "Send data storage area" field, enter "D300". Click the OK
button.
6) The "Packet setting" screen is displayed.
The packet setting of "Packet name" H7B:RD Operation Mode has
been completed. Click the Close button.
7) The "Protocol setting" screen is displayed.
Repeat the steps 3) to 6) described above to configure the packet
setting of "Packet name" NOR:RD Data(4 Digits Data) and ERR:NAK
Response.
In "Data storage area", enter the following values.
Element No.
2 Inverter Station Number
3 Read Data
2 Inverter Station Number
3 Error Code
Element name
MELSEC-Q
Data storage area
specification
Enter D200.
Enter D201.
Enter D202.
Enter D203.
8 - 18