Siemens SIMATIC ET 200SP Manual page 128

Technical specifications
Output delay with resistive load
"0" to "1", typ.
"0" to "1", max.
"1" to "0", typ.
"1" to "0", max.
Parallel switching of 2 outputs
for uprating
Switching frequency
with resistive load, max.
with inductive load, max.
on lamp load, max.
Total current of the outputs
Current per channel, max.
Current per group, max.
Current per module, max.
Cable length
shielded, max.
unshielded, max.
Isochronous mode
Isochronous operation (application synchronized
up to terminal)
Bus cycle time (TDP), min.
Jitter, max.
Interrupts/diagnostics/status information
Substitute values connectable
Alarms
Diagnostic alarm
Diagnostic messages
Diagnostics
Monitoring the supply voltage
Short-circuit
Diagnostics indication LED
Monitoring of the supply voltage (PWR-LED)
Channel status display
for module diagnostics
128
6ES7138-6DB00-0BB1
0 µs; With High Speed output, 4.5 µs with Stand-
ard output
0,8 µs; With High Speed output, 9 µs with Stand-
ard output
0 µs; With High Speed output, 4.5 µs with Stand-
ard output
0,8 µs; With High Speed output, 9 µs with Stand-
ard output
Yes
100 kHz; With High Speed output, 10 kHz with
standard output
100 kHz; With High Speed output, 10 kHz with
standard output
10 Hz
2 A
4 A
4 A
1000 m; Depending on load and cable quality
600 m; Depending on load and cable quality
Yes
250 µs; with 1 channel configuration, 375 µs with
2 channel configuration
1 µs; typically ±
Yes; Parameterizable
Yes
Yes
Yes
Yes
Yes; green PWR LED
Yes
Yes; green/red DIAG LED
Technology module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
Manual, 09/2015, A5E35061186-AA