Table of Contents
Advertisement
1 F i r s t T h i n g s F i r s t
System procedures
Starting up MC35
After you have initially charged your device for about four hours, the device is ready for
use. You can now start up your device where you will calibrate the display, learn some
basic stylus usage, and set up the system date and time.
To start up your MC35:
1
Turn on your device by pressing the Power button
the device.
2
Follow the onscreen instructions on the Welcome Screen Wizard.
System procedures
The following sections describe various system procedures that help you use the device
more efficiently.
Recalibrating the screen
When you first startup your MC35, you are asked to calibrate the screen by tapping the
center of a cross with your stylus as it moves around the screen. This process ensures
that when you tap the screen with your stylus the item tapped is activated.
If, however, while using your device, you discover tapping an item does not bring up the
appropriate response, it means your device has lost its calibration.
To recalibrate the screen:
1
Launch the Align Screen window by performing one of the following:
•
4
Software launching
(a)
Tap
, then Settings.
located on the right side of
Advertisement
Table of Contents
