Table of Contents
Advertisement
3 M a n a g i n g P r o g r a m s
Using ActiveSync
WiFi connection
Windows Mobile supports the standard Network Protocol (TCP/IP) that allows you to
easily connect to the Internet by modem or high frequency wireless LAN technology.
With the device's integrated WiFi
existing wireless network access point or hot spot. The wireless network access points or
hot spots can be found in homes and offices. Using WiFi networking, you can connect to
a computer and send and receive files.
A wireless network can be added either when the network is detected or by manually
entering settings information.
connection, see "Setting up a wireless network connection" on page 111.
Setting mobile schedule during synchronization with your
computer
You can set two separate mobile schedules when wirelessly synchronizing your device
with your computer.
•
Peak time schedule - to synchronize during work hours or other times you
receive higher mail volumes
•
Off-peak schedule - to synchronize during times when you receive lower mail
volumes
NOTE: When you are in roaming mode, you can synchronize manually to reduce roaming charges, or
you can use the mobile schedule you've set.
1
On your device tap
2
Tap Menu, then Schedule.
3
Select the frequency of synchronization for the three conditions—during peak
times, off-peak times, and when roaming.
4
Tap Peak Times to set the days and hours of your peak time schedule.
5
Tap OK.
Once you have completed the first synchronization process, you can initiate
synchronization from your device anytime, using either the USB sync cable, via infrared
or via Bluetooth.
Synchronizing with a server
The option to synchronize your device with a server is available when you first create a
partnership. Before you can begin to synchronize information with a server, you need to
request the following server configuration information, either from your service provider
or from your corporate network administrator:
•
Your user name and password in your corporate network
•
The name of the Microsoft Exchange server
To set up synchronization with a Microsoft Exchange server:
1
On your device tap
2
Tap Menu, then Add Server Source.
3
In the "Server address" box, enter the name of the Microsoft Exchange server to
which you want to connect.
Select the "This server requires an ecrypted (SSL) connection" check box if it's
applicable to your corporate network.
4
Tap Next.
5
Enter your user name, password, and domain name.
If you intend to enable automatic synchronization, select the "Save password" check
box.
6
Tap Advanced.
Define the rules for resolving conflicts if items change on both your device and on
the server.
7
Tap Next.
34
(available for MC3574 models
For more information on how to set up a wireless network
, Programs, then ActiveSync
, Programs, then ActiveSync
only), you can scan for
.
.
Advertisement
Table of Contents
