Table of Contents
Advertisement
2
Push the card into the slot until you hear an audible system sound; this indicates
that the card is already properly seated within the slot. The card is secure when it is
not protruding from the base.
3
Insert the rubber cover back into place.
To remove a storage card:
1
Hold your device securely, then lift the rubber cover from the SD/MMC slot.
2
Push against the top of the card, as if you were pushing it further into the slot, letting
the card spring out. An audible system sound indicates that the card has been
released.
3
Gently remove the card from the slot.
4
Close the rubber cover.
Command interface
Hardware buttons
Your device has hardware buttons that control actions and scroll functions, and a stylus
for selecting items and entering information.
Using the hotkeys
On your device, the hotkeys allows you do the following:
Key
Orange key
Backlight/ 0 key
Star key
Messaging
Shift key
Hardware and command interface
Action
Use this key to access the secondary layer of characters
and actions.
•
Press the Orange key once to activate this mode
followed by another key.
•
Press the Orange key twice to lock the mode. Press the
Orange key a third time to unlock.
Use this key to adjust the backlight from dim to bright.
When in Today screen, press this key to display the Dialer
screen.
Use this key to display the Star Key soft keyboard option.
Use this key to instantly display the Messaging application.
Use the Shift/Caps key to change the state of the alpha
characters from lowercase to uppercase. Pressing the key
twice, locks the state of the characters to uppercase.
2 G e t ti n g S ta r te d
19
Advertisement
Table of Contents
