Table of Contents
Advertisement
1 F i r s t T h i n g s F i r s t
System procedures
Resetting the device
You may have to perform a reset if the device freezes (i.e., device no longer responds to
the buttons on the screen).
To perform a soft reset:
A soft reset allows your device to get a fresh start, similar to rebooting a computer. This
restarts your device and adjust memory allocation. All records and entries are retained
after a soft reset. Unsaved data in open programs may in some cases be lost.
1
Remove the stylus from its holder.
2
Lightly press the tip of the stylus to the reset button located on the lower-left side of
the device.
To perform a hard reset:
A hard reset removes power to your device. This erases all records and entries, deletes
all programs you have added, and restores the device default factory settings. Never
perform a hard reset unless a soft reset does not correct your problem. When you
perform your next ActiveSync operation, you can restore any data that you previously
synchronized to your computer or you can restore data that you backed up to a storage
card.
NOTE: When you perform a hard reset, the date and time settings are not be retained. Formats,
preferences, and other settings are restored to their default factory settings.
1
Hold down the Power
2
While holding down the Power and Record buttons, gently press the tip of the
stylus to the Reset button.
The message "To clear all data in the memory, press Volume Up button. To cancel
the operation, press Volume Down Button." appears.
3
Press the Volume key up.
Another message appears requesting confirmation.
6
and Record buttons.
Advertisement
Table of Contents
