5 Press the Perform Calibration.... softkey.
6 Follow the on-screen instructions and then press Execute Calibration .
To move the active function area
1 Press the front-panel System key.
2 Press the Move Active Area softkey. Each press of the softkey moves the active
function area to one of eight on-screen locations.
To display the OSA State information panel
1 Press the front-panel System key.
2 Press the More System Functions.... softkey.
3 Press the OSA State.... softkey.
4 The OSA State Information display panel opens and can be printed.
The OSA State information panel
Using the Optical Spectrum Analyzer
The System Menus
3-47