To Set The Active Trace; To Set The Update Function For The Trace; To Set The Display Function For The Trace - HP 86140A Series User Manual

Using the Traces functions

To set the active trace

1 Press the front-panel Traces key.
2 Press the Active Trace.... softkey.
3 Use the arrow keys or knob to select the active trace.
or
1 Press the front-panel Markers key.
2 Press the Active Trace.... softkey.
3 Use the arrow keys or knob to select the active trace.
To put a marker on a trace, or to make changes to a trace, it must be the active
trace. The active trace is designated by the double-arrows at either the left or
right edge of the graticule.

To set the update function for the trace

1 Press the front-panel Traces key.
2 Select the trace to be changed.
3 Press the Update <trace> softkey.
4 Use the arrow keys or knob to select
When
When

To set the display function for the trace

1 Press the front-panel Traces key.
2 Select the trace to be changed.
3 Press the View <trace> softkey to turn the display of the selected trace
, the trace always accepts data when data is available.
ON
, the trace will not be updated.
OFF
Using the Optical Spectrum Analyzer
or .
ON OFF
The Traces Menus
or .
ON OFF
3-57